| Draft as of 2026-06-11 |
Definitions for the KBV-EX-MIO-LAB-Alternative-Result extension.
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | Diese Extension bildet das Resultat einer Laboruntersuchung mit einer Alternativeinheit ab. Optional Extension Element - found in all resources. |
| Short | ExtensionOptional Extensions Element |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 2. Extension.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 10..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 4. Extension.extension:value | |
| Slice Name | value |
| Definition | An Extension |
| Short | ExtensionAdditional content defined by implementations |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 6. Extension.extension:value.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 8. Extension.extension:value.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | value |
| 10. Extension.extension:value.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Type | Choice of: Quantity, Range, Ratio, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Age, Reference, TriggerDefinition, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.value[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators: |
| 12. Extension.extension:value.value[x]:valueQuantity | |
| Slice Name | valueQuantity |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | Quantity, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Pattern Value | { |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 14. Extension.extension:value.value[x]:valueQuantity.value | |
| Definition | The value of the measured amount. The value includes an implicit precision in the presentation of the value. |
| Short | Numerical value (with implicit precision) |
| Comments | The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). |
| Control | 10..1 |
| Type | decimal |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Precision is handled implicitly in almost all cases of measurement. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 16. Extension.extension:value.value[x]:valueQuantity.comparator | |
| Definition | How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value. |
| Short | < | <= | >= | > - how to understand the value |
| Control | 0..1 |
| Binding | The codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1)How the Quantity should be understood and represented. |
| Type | code |
| Is Modifier | true because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. |
| Meaning if Missing | If there is no comparator, then there is no modification of the value |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 18. Extension.extension:value.value[x]:valueQuantity.unit | |
| Definition | A human-readable form of the unit. |
| Short | Unit representation |
| Control | 10..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 20. Extension.extension:value.value[x]:valueQuantity.system | |
| Definition | The identification of the system that provides the coded form of the unit. |
| Short | System that defines coded unit form |
| Control | 10..1 This element is affected by the following invariants: qty-3 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need to know the system that defines the coded form of the unit. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 22. Extension.extension:value.value[x]:valueQuantity.code | |
| Definition | A computer processable form of the unit in some unit representation system. |
| Short | Coded form of the unit |
| Comments | The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. |
| Control | 10..1 |
| Type | code |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 24. Extension.extension:value.value[x]:valueRange | |
| Slice Name | valueRange |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | Range, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 26. Extension.extension:value.value[x]:valueRange.low | |
| Definition | The low limit. The boundary is inclusive. |
| Short | Low limit |
| Comments | If the low element is missing, the low boundary is not known. |
| Control | 0..1 |
| Type | Quantity(SimpleQuantity) |
| Is Modifier | false |
| Summary | true |
| Pattern Value | { |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 28. Extension.extension:value.value[x]:valueRange.low.value | |
| Definition | The value of the measured amount. The value includes an implicit precision in the presentation of the value. |
| Short | Numerical value (with implicit precision) |
| Comments | The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). |
| Control | 10..1 |
| Type | decimal |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Precision is handled implicitly in almost all cases of measurement. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 30. Extension.extension:value.value[x]:valueRange.low.comparator | |
| Definition | Not allowed to be used in this context How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value. |
| Short | < | <= | >= | > - how to understand the value |
| Control | 0..01 |
| Binding | The codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1)How the Quantity should be understood and represented. |
| Type | code |
| Is Modifier | true because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. |
| Meaning if Missing | If there is no comparator, then there is no modification of the value |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 32. Extension.extension:value.value[x]:valueRange.low.unit | |
| Definition | A human-readable form of the unit. |
| Short | Unit representation |
| Control | 10..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 34. Extension.extension:value.value[x]:valueRange.low.system | |
| Definition | The identification of the system that provides the coded form of the unit. |
| Short | System that defines coded unit form |
| Control | 10..1 This element is affected by the following invariants: qty-3 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need to know the system that defines the coded form of the unit. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 36. Extension.extension:value.value[x]:valueRange.low.code | |
| Definition | A computer processable form of the unit in some unit representation system. |
| Short | Coded form of the unit |
| Comments | The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. |
| Control | 10..1 |
| Type | code |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 38. Extension.extension:value.value[x]:valueRange.high | |
| Definition | The high limit. The boundary is inclusive. |
| Short | High limit |
| Comments | If the high element is missing, the high boundary is not known. |
| Control | 0..1 |
| Type | Quantity(SimpleQuantity) |
| Is Modifier | false |
| Summary | true |
| Pattern Value | { |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 40. Extension.extension:value.value[x]:valueRange.high.value | |
| Definition | The value of the measured amount. The value includes an implicit precision in the presentation of the value. |
| Short | Numerical value (with implicit precision) |
| Comments | The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). |
| Control | 10..1 |
| Type | decimal |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Precision is handled implicitly in almost all cases of measurement. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 42. Extension.extension:value.value[x]:valueRange.high.comparator | |
| Definition | Not allowed to be used in this context How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value. |
| Short | < | <= | >= | > - how to understand the value |
| Control | 0..01 |
| Binding | The codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1)How the Quantity should be understood and represented. |
| Type | code |
| Is Modifier | true because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. |
| Meaning if Missing | If there is no comparator, then there is no modification of the value |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 44. Extension.extension:value.value[x]:valueRange.high.unit | |
| Definition | A human-readable form of the unit. |
| Short | Unit representation |
| Control | 10..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 46. Extension.extension:value.value[x]:valueRange.high.system | |
| Definition | The identification of the system that provides the coded form of the unit. |
| Short | System that defines coded unit form |
| Control | 10..1 This element is affected by the following invariants: qty-3 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need to know the system that defines the coded form of the unit. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 48. Extension.extension:value.value[x]:valueRange.high.code | |
| Definition | A computer processable form of the unit in some unit representation system. |
| Short | Coded form of the unit |
| Comments | The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. |
| Control | 10..1 |
| Type | code |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 50. Extension.extension:value.value[x]:valueRatio | |
| Slice Name | valueRatio |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | Ratio, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 52. Extension.extension:value.value[x]:valueRatio.numerator | |
| Definition | The value of the numerator. |
| Short | Numerator value |
| Control | 10..1 |
| Type | Quantity |
| Is Modifier | false |
| Summary | true |
| Pattern Value | { |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 54. Extension.extension:value.value[x]:valueRatio.numerator.value | |
| Definition | The value of the measured amount. The value includes an implicit precision in the presentation of the value. |
| Short | Numerical value (with implicit precision) |
| Comments | The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). |
| Control | 10..1 |
| Type | decimal |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Precision is handled implicitly in almost all cases of measurement. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 56. Extension.extension:value.value[x]:valueRatio.numerator.comparator | |
| Definition | How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value. |
| Short | < | <= | >= | > - how to understand the value |
| Control | 0..1 |
| Binding | The codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1)How the Quantity should be understood and represented. |
| Type | code |
| Is Modifier | true because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. |
| Meaning if Missing | If there is no comparator, then there is no modification of the value |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 58. Extension.extension:value.value[x]:valueRatio.numerator.unit | |
| Definition | A human-readable form of the unit. |
| Short | Unit representation |
| Control | 10..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 60. Extension.extension:value.value[x]:valueRatio.numerator.system | |
| Definition | The identification of the system that provides the coded form of the unit. |
| Short | System that defines coded unit form |
| Control | 10..1 This element is affected by the following invariants: qty-3 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need to know the system that defines the coded form of the unit. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 62. Extension.extension:value.value[x]:valueRatio.numerator.code | |
| Definition | A computer processable form of the unit in some unit representation system. |
| Short | Coded form of the unit |
| Comments | The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. |
| Control | 10..1 |
| Type | code |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 64. Extension.extension:value.value[x]:valueRatio.denominator | |
| Definition | The value of the denominator. |
| Short | Denominator value |
| Control | 10..1 |
| Type | Quantity |
| Is Modifier | false |
| Summary | true |
| Pattern Value | { |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 66. Extension.extension:value.value[x]:valueRatio.denominator.value | |
| Definition | The value of the measured amount. The value includes an implicit precision in the presentation of the value. |
| Short | Numerical value (with implicit precision) |
| Comments | The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). |
| Control | 10..1 |
| Type | decimal |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Precision is handled implicitly in almost all cases of measurement. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 68. Extension.extension:value.value[x]:valueRatio.denominator.comparator | |
| Definition | How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value. |
| Short | < | <= | >= | > - how to understand the value |
| Control | 0..1 |
| Binding | The codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1)How the Quantity should be understood and represented. |
| Type | code |
| Is Modifier | true because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. |
| Meaning if Missing | If there is no comparator, then there is no modification of the value |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 70. Extension.extension:value.value[x]:valueRatio.denominator.unit | |
| Definition | A human-readable form of the unit. |
| Short | Unit representation |
| Control | 10..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 72. Extension.extension:value.value[x]:valueRatio.denominator.system | |
| Definition | The identification of the system that provides the coded form of the unit. |
| Short | System that defines coded unit form |
| Control | 10..1 This element is affected by the following invariants: qty-3 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need to know the system that defines the coded form of the unit. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 74. Extension.extension:value.value[x]:valueRatio.denominator.code | |
| Definition | A computer processable form of the unit in some unit representation system. |
| Short | Coded form of the unit |
| Comments | The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. |
| Control | 10..1 |
| Type | code |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 76. Extension.extension:referenceRange | |
| Slice Name | referenceRange |
| Definition | An Extension |
| Short | ExtensionAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 78. Extension.extension:referenceRange.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 80. Extension.extension:referenceRange.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | referenceRange |
| 82. Extension.extension:referenceRange.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Type | Range, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 84. Extension.extension:referenceRange.value[x].low | |
| Definition | The low limit. The boundary is inclusive. |
| Short | Low limit |
| Comments | If the low element is missing, the low boundary is not known. |
| Control | 0..1 |
| Type | Quantity(SimpleQuantity) |
| Is Modifier | false |
| Summary | true |
| Pattern Value | { |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 86. Extension.extension:referenceRange.value[x].low.value | |
| Definition | The value of the measured amount. The value includes an implicit precision in the presentation of the value. |
| Short | Numerical value (with implicit precision) |
| Comments | The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). |
| Control | 10..1 |
| Type | decimal |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Precision is handled implicitly in almost all cases of measurement. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 88. Extension.extension:referenceRange.value[x].low.comparator | |
| Definition | Not allowed to be used in this context How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value. |
| Short | < | <= | >= | > - how to understand the value |
| Control | 0..01 |
| Binding | The codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1)How the Quantity should be understood and represented. |
| Type | code |
| Is Modifier | true because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. |
| Meaning if Missing | If there is no comparator, then there is no modification of the value |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 90. Extension.extension:referenceRange.value[x].low.unit | |
| Definition | A human-readable form of the unit. |
| Short | Unit representation |
| Control | 10..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 92. Extension.extension:referenceRange.value[x].low.system | |
| Definition | The identification of the system that provides the coded form of the unit. |
| Short | System that defines coded unit form |
| Control | 10..1 This element is affected by the following invariants: qty-3 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need to know the system that defines the coded form of the unit. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 94. Extension.extension:referenceRange.value[x].low.code | |
| Definition | A computer processable form of the unit in some unit representation system. |
| Short | Coded form of the unit |
| Comments | The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. |
| Control | 10..1 |
| Type | code |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 96. Extension.extension:referenceRange.value[x].high | |
| Definition | The high limit. The boundary is inclusive. |
| Short | High limit |
| Comments | If the high element is missing, the high boundary is not known. |
| Control | 0..1 |
| Type | Quantity(SimpleQuantity) |
| Is Modifier | false |
| Summary | true |
| Pattern Value | { |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 98. Extension.extension:referenceRange.value[x].high.value | |
| Definition | The value of the measured amount. The value includes an implicit precision in the presentation of the value. |
| Short | Numerical value (with implicit precision) |
| Comments | The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). |
| Control | 10..1 |
| Type | decimal |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Precision is handled implicitly in almost all cases of measurement. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 100. Extension.extension:referenceRange.value[x].high.comparator | |
| Definition | Not allowed to be used in this context How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value. |
| Short | < | <= | >= | > - how to understand the value |
| Control | 0..01 |
| Binding | The codes SHALL be taken from QuantityComparatorhttp://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1 (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1)How the Quantity should be understood and represented. |
| Type | code |
| Is Modifier | true because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. |
| Meaning if Missing | If there is no comparator, then there is no modification of the value |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 102. Extension.extension:referenceRange.value[x].high.unit | |
| Definition | A human-readable form of the unit. |
| Short | Unit representation |
| Control | 10..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 104. Extension.extension:referenceRange.value[x].high.system | |
| Definition | The identification of the system that provides the coded form of the unit. |
| Short | System that defines coded unit form |
| Control | 10..1 This element is affected by the following invariants: qty-3 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need to know the system that defines the coded form of the unit. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 106. Extension.extension:referenceRange.value[x].high.code | |
| Definition | A computer processable form of the unit in some unit representation system. |
| Short | Coded form of the unit |
| Comments | The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. |
| Control | 10..1 |
| Type | code |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 108. Extension.extension:zlog | |
| Slice Name | zlog |
| Definition | An Extension |
| Short | ExtensionAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 110. Extension.extension:zlog.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 112. Extension.extension:zlog.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | zlog |
| 114. Extension.extension:zlog.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Type | decimal, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 116. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | https://fhir.kbv.de/StructureDefinition/KBV_EX_MIO_LAB_Alternative_Result |
| 118. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..01 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | Diese Extension bildet das Resultat einer Laboruntersuchung mit einer Alternativeinheit ab. |
| 2. Extension.extension | |
| Control | 1..? |
| 4. Extension.extension:value | |
| Slice Name | value |
| Control | 1..1 |
| 6. Extension.extension:value.extension | |
| Control | 0..0 |
| 8. Extension.extension:value.url | |
| Fixed Value | value |
| 10. Extension.extension:value.value[x] | |
| Control | 1..? |
| Type | Choice of: Quantity, Range, Ratio |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Slicing | This element introduces a set of slices on Extension.extension.value[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 12. Extension.extension:value.value[x]:valueQuantity | |
| Slice Name | valueQuantity |
| Control | 0..1 |
| Type | Quantity |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Pattern Value | { |
| 14. Extension.extension:value.value[x]:valueQuantity.value | |
| Control | 1..? |
| 16. Extension.extension:value.value[x]:valueQuantity.unit | |
| Control | 1..? |
| 18. Extension.extension:value.value[x]:valueQuantity.system | |
| Control | 1..? |
| 20. Extension.extension:value.value[x]:valueQuantity.code | |
| Control | 1..? |
| 22. Extension.extension:value.value[x]:valueRange | |
| Slice Name | valueRange |
| Control | 0..1 |
| Type | Range |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 24. Extension.extension:value.value[x]:valueRange.low | |
| Pattern Value | { |
| 26. Extension.extension:value.value[x]:valueRange.low.value | |
| Control | 1..? |
| 28. Extension.extension:value.value[x]:valueRange.low.unit | |
| Control | 1..? |
| 30. Extension.extension:value.value[x]:valueRange.low.system | |
| Control | 1..? |
| 32. Extension.extension:value.value[x]:valueRange.low.code | |
| Control | 1..? |
| 34. Extension.extension:value.value[x]:valueRange.high | |
| Pattern Value | { |
| 36. Extension.extension:value.value[x]:valueRange.high.value | |
| Control | 1..? |
| 38. Extension.extension:value.value[x]:valueRange.high.unit | |
| Control | 1..? |
| 40. Extension.extension:value.value[x]:valueRange.high.system | |
| Control | 1..? |
| 42. Extension.extension:value.value[x]:valueRange.high.code | |
| Control | 1..? |
| 44. Extension.extension:value.value[x]:valueRatio | |
| Slice Name | valueRatio |
| Control | 0..1 |
| Type | Ratio |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 46. Extension.extension:value.value[x]:valueRatio.numerator | |
| Control | 1..? |
| Pattern Value | { |
| 48. Extension.extension:value.value[x]:valueRatio.numerator.value | |
| Control | 1..? |
| 50. Extension.extension:value.value[x]:valueRatio.numerator.unit | |
| Control | 1..? |
| 52. Extension.extension:value.value[x]:valueRatio.numerator.system | |
| Control | 1..? |
| 54. Extension.extension:value.value[x]:valueRatio.numerator.code | |
| Control | 1..? |
| 56. Extension.extension:value.value[x]:valueRatio.denominator | |
| Control | 1..? |
| Pattern Value | { |
| 58. Extension.extension:value.value[x]:valueRatio.denominator.value | |
| Control | 1..? |
| 60. Extension.extension:value.value[x]:valueRatio.denominator.unit | |
| Control | 1..? |
| 62. Extension.extension:value.value[x]:valueRatio.denominator.system | |
| Control | 1..? |
| 64. Extension.extension:value.value[x]:valueRatio.denominator.code | |
| Control | 1..? |
| 66. Extension.extension:referenceRange | |
| Slice Name | referenceRange |
| Control | 0..1 |
| 68. Extension.extension:referenceRange.extension | |
| Control | 0..0 |
| 70. Extension.extension:referenceRange.url | |
| Fixed Value | referenceRange |
| 72. Extension.extension:referenceRange.value[x] | |
| Control | 1..? |
| Type | Range |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 74. Extension.extension:referenceRange.value[x].low | |
| Pattern Value | { |
| 76. Extension.extension:referenceRange.value[x].low.value | |
| Control | 1..? |
| 78. Extension.extension:referenceRange.value[x].low.unit | |
| Control | 1..? |
| 80. Extension.extension:referenceRange.value[x].low.system | |
| Control | 1..? |
| 82. Extension.extension:referenceRange.value[x].low.code | |
| Control | 1..? |
| 84. Extension.extension:referenceRange.value[x].high | |
| Pattern Value | { |
| 86. Extension.extension:referenceRange.value[x].high.value | |
| Control | 1..? |
| 88. Extension.extension:referenceRange.value[x].high.unit | |
| Control | 1..? |
| 90. Extension.extension:referenceRange.value[x].high.system | |
| Control | 1..? |
| 92. Extension.extension:referenceRange.value[x].high.code | |
| Control | 1..? |
| 94. Extension.extension:zlog | |
| Slice Name | zlog |
| Control | 0..1 |
| 96. Extension.extension:zlog.extension | |
| Control | 0..0 |
| 98. Extension.extension:zlog.url | |
| Fixed Value | zlog |
| 100. Extension.extension:zlog.value[x] | |
| Control | 1..? |
| Type | decimal |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 102. Extension.url | |
| Fixed Value | https://fhir.kbv.de/StructureDefinition/KBV_EX_MIO_LAB_Alternative_Result |
| 104. Extension.value[x] | |
| Control | 0..0 |
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | Diese Extension bildet das Resultat einer Laboruntersuchung mit einer Alternativeinheit ab. |
| Short | Extension |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 2. Extension.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 4. Extension.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 1..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 6. Extension.extension:value | |
| Slice Name | value |
| Definition | An Extension |
| Short | Extension |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 8. Extension.extension:value.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 10. Extension.extension:value.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 12. Extension.extension:value.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | value |
| 14. Extension.extension:value.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Type | Choice of: Quantity, Range, Ratio |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.value[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators: |
| 16. Extension.extension:value.value[x]:valueQuantity | |
| Slice Name | valueQuantity |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | Quantity |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Pattern Value | { |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 18. Extension.extension:value.value[x]:valueQuantity.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 20. Extension.extension:value.value[x]:valueQuantity.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.value[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 22. Extension.extension:value.value[x]:valueQuantity.value | |
| Definition | The value of the measured amount. The value includes an implicit precision in the presentation of the value. |
| Short | Numerical value (with implicit precision) |
| Comments | The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). |
| Control | 1..1 |
| Type | decimal |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Precision is handled implicitly in almost all cases of measurement. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 24. Extension.extension:value.value[x]:valueQuantity.comparator | |
| Definition | How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value. |
| Short | < | <= | >= | > - how to understand the value |
| Control | 0..1 |
| Binding | The codes SHALL be taken from QuantityComparator (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1)How the Quantity should be understood and represented. |
| Type | code |
| Is Modifier | true because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. |
| Meaning if Missing | If there is no comparator, then there is no modification of the value |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 26. Extension.extension:value.value[x]:valueQuantity.unit | |
| Definition | A human-readable form of the unit. |
| Short | Unit representation |
| Control | 1..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 28. Extension.extension:value.value[x]:valueQuantity.system | |
| Definition | The identification of the system that provides the coded form of the unit. |
| Short | System that defines coded unit form |
| Control | 1..1 This element is affected by the following invariants: qty-3 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need to know the system that defines the coded form of the unit. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 30. Extension.extension:value.value[x]:valueQuantity.code | |
| Definition | A computer processable form of the unit in some unit representation system. |
| Short | Coded form of the unit |
| Comments | The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. |
| Control | 1..1 |
| Type | code |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 32. Extension.extension:value.value[x]:valueRange | |
| Slice Name | valueRange |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | Range |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 34. Extension.extension:value.value[x]:valueRange.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 36. Extension.extension:value.value[x]:valueRange.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.value[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 38. Extension.extension:value.value[x]:valueRange.low | |
| Definition | The low limit. The boundary is inclusive. |
| Short | Low limit |
| Comments | If the low element is missing, the low boundary is not known. |
| Control | 0..1 |
| Type | Quantity(SimpleQuantity) |
| Is Modifier | false |
| Summary | true |
| Pattern Value | { |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 40. Extension.extension:value.value[x]:valueRange.low.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 42. Extension.extension:value.value[x]:valueRange.low.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.value[x].low.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 44. Extension.extension:value.value[x]:valueRange.low.value | |
| Definition | The value of the measured amount. The value includes an implicit precision in the presentation of the value. |
| Short | Numerical value (with implicit precision) |
| Comments | The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). |
| Control | 1..1 |
| Type | decimal |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Precision is handled implicitly in almost all cases of measurement. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 46. Extension.extension:value.value[x]:valueRange.low.comparator | |
| Definition | Not allowed to be used in this context |
| Short | < | <= | >= | > - how to understand the value |
| Control | 0..0 |
| Binding | The codes SHALL be taken from QuantityComparator (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1)How the Quantity should be understood and represented. |
| Type | code |
| Is Modifier | true because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. |
| Meaning if Missing | If there is no comparator, then there is no modification of the value |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 48. Extension.extension:value.value[x]:valueRange.low.unit | |
| Definition | A human-readable form of the unit. |
| Short | Unit representation |
| Control | 1..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 50. Extension.extension:value.value[x]:valueRange.low.system | |
| Definition | The identification of the system that provides the coded form of the unit. |
| Short | System that defines coded unit form |
| Control | 1..1 This element is affected by the following invariants: qty-3 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need to know the system that defines the coded form of the unit. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 52. Extension.extension:value.value[x]:valueRange.low.code | |
| Definition | A computer processable form of the unit in some unit representation system. |
| Short | Coded form of the unit |
| Comments | The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. |
| Control | 1..1 |
| Type | code |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 54. Extension.extension:value.value[x]:valueRange.high | |
| Definition | The high limit. The boundary is inclusive. |
| Short | High limit |
| Comments | If the high element is missing, the high boundary is not known. |
| Control | 0..1 |
| Type | Quantity(SimpleQuantity) |
| Is Modifier | false |
| Summary | true |
| Pattern Value | { |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 56. Extension.extension:value.value[x]:valueRange.high.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 58. Extension.extension:value.value[x]:valueRange.high.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.value[x].high.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 60. Extension.extension:value.value[x]:valueRange.high.value | |
| Definition | The value of the measured amount. The value includes an implicit precision in the presentation of the value. |
| Short | Numerical value (with implicit precision) |
| Comments | The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). |
| Control | 1..1 |
| Type | decimal |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Precision is handled implicitly in almost all cases of measurement. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 62. Extension.extension:value.value[x]:valueRange.high.comparator | |
| Definition | Not allowed to be used in this context |
| Short | < | <= | >= | > - how to understand the value |
| Control | 0..0 |
| Binding | The codes SHALL be taken from QuantityComparator (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1)How the Quantity should be understood and represented. |
| Type | code |
| Is Modifier | true because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. |
| Meaning if Missing | If there is no comparator, then there is no modification of the value |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 64. Extension.extension:value.value[x]:valueRange.high.unit | |
| Definition | A human-readable form of the unit. |
| Short | Unit representation |
| Control | 1..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 66. Extension.extension:value.value[x]:valueRange.high.system | |
| Definition | The identification of the system that provides the coded form of the unit. |
| Short | System that defines coded unit form |
| Control | 1..1 This element is affected by the following invariants: qty-3 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need to know the system that defines the coded form of the unit. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 68. Extension.extension:value.value[x]:valueRange.high.code | |
| Definition | A computer processable form of the unit in some unit representation system. |
| Short | Coded form of the unit |
| Comments | The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. |
| Control | 1..1 |
| Type | code |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 70. Extension.extension:value.value[x]:valueRatio | |
| Slice Name | valueRatio |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | Ratio |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 72. Extension.extension:value.value[x]:valueRatio.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 74. Extension.extension:value.value[x]:valueRatio.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.value[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 76. Extension.extension:value.value[x]:valueRatio.numerator | |
| Definition | The value of the numerator. |
| Short | Numerator value |
| Control | 1..1 |
| Type | Quantity |
| Is Modifier | false |
| Summary | true |
| Pattern Value | { |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 78. Extension.extension:value.value[x]:valueRatio.numerator.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 80. Extension.extension:value.value[x]:valueRatio.numerator.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.value[x].numerator.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 82. Extension.extension:value.value[x]:valueRatio.numerator.value | |
| Definition | The value of the measured amount. The value includes an implicit precision in the presentation of the value. |
| Short | Numerical value (with implicit precision) |
| Comments | The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). |
| Control | 1..1 |
| Type | decimal |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Precision is handled implicitly in almost all cases of measurement. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 84. Extension.extension:value.value[x]:valueRatio.numerator.comparator | |
| Definition | How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value. |
| Short | < | <= | >= | > - how to understand the value |
| Control | 0..1 |
| Binding | The codes SHALL be taken from QuantityComparator (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1)How the Quantity should be understood and represented. |
| Type | code |
| Is Modifier | true because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. |
| Meaning if Missing | If there is no comparator, then there is no modification of the value |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 86. Extension.extension:value.value[x]:valueRatio.numerator.unit | |
| Definition | A human-readable form of the unit. |
| Short | Unit representation |
| Control | 1..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 88. Extension.extension:value.value[x]:valueRatio.numerator.system | |
| Definition | The identification of the system that provides the coded form of the unit. |
| Short | System that defines coded unit form |
| Control | 1..1 This element is affected by the following invariants: qty-3 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need to know the system that defines the coded form of the unit. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 90. Extension.extension:value.value[x]:valueRatio.numerator.code | |
| Definition | A computer processable form of the unit in some unit representation system. |
| Short | Coded form of the unit |
| Comments | The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. |
| Control | 1..1 |
| Type | code |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 92. Extension.extension:value.value[x]:valueRatio.denominator | |
| Definition | The value of the denominator. |
| Short | Denominator value |
| Control | 1..1 |
| Type | Quantity |
| Is Modifier | false |
| Summary | true |
| Pattern Value | { |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 94. Extension.extension:value.value[x]:valueRatio.denominator.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 96. Extension.extension:value.value[x]:valueRatio.denominator.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.value[x].denominator.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 98. Extension.extension:value.value[x]:valueRatio.denominator.value | |
| Definition | The value of the measured amount. The value includes an implicit precision in the presentation of the value. |
| Short | Numerical value (with implicit precision) |
| Comments | The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). |
| Control | 1..1 |
| Type | decimal |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Precision is handled implicitly in almost all cases of measurement. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 100. Extension.extension:value.value[x]:valueRatio.denominator.comparator | |
| Definition | How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value. |
| Short | < | <= | >= | > - how to understand the value |
| Control | 0..1 |
| Binding | The codes SHALL be taken from QuantityComparator (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1)How the Quantity should be understood and represented. |
| Type | code |
| Is Modifier | true because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. |
| Meaning if Missing | If there is no comparator, then there is no modification of the value |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 102. Extension.extension:value.value[x]:valueRatio.denominator.unit | |
| Definition | A human-readable form of the unit. |
| Short | Unit representation |
| Control | 1..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 104. Extension.extension:value.value[x]:valueRatio.denominator.system | |
| Definition | The identification of the system that provides the coded form of the unit. |
| Short | System that defines coded unit form |
| Control | 1..1 This element is affected by the following invariants: qty-3 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need to know the system that defines the coded form of the unit. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 106. Extension.extension:value.value[x]:valueRatio.denominator.code | |
| Definition | A computer processable form of the unit in some unit representation system. |
| Short | Coded form of the unit |
| Comments | The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. |
| Control | 1..1 |
| Type | code |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 108. Extension.extension:referenceRange | |
| Slice Name | referenceRange |
| Definition | An Extension |
| Short | Extension |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 110. Extension.extension:referenceRange.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 112. Extension.extension:referenceRange.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 114. Extension.extension:referenceRange.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | referenceRange |
| 116. Extension.extension:referenceRange.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Type | Range |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 118. Extension.extension:referenceRange.value[x].id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 120. Extension.extension:referenceRange.value[x].extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.value[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 122. Extension.extension:referenceRange.value[x].low | |
| Definition | The low limit. The boundary is inclusive. |
| Short | Low limit |
| Comments | If the low element is missing, the low boundary is not known. |
| Control | 0..1 |
| Type | Quantity(SimpleQuantity) |
| Is Modifier | false |
| Summary | true |
| Pattern Value | { |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 124. Extension.extension:referenceRange.value[x].low.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 126. Extension.extension:referenceRange.value[x].low.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.value[x].low.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 128. Extension.extension:referenceRange.value[x].low.value | |
| Definition | The value of the measured amount. The value includes an implicit precision in the presentation of the value. |
| Short | Numerical value (with implicit precision) |
| Comments | The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). |
| Control | 1..1 |
| Type | decimal |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Precision is handled implicitly in almost all cases of measurement. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 130. Extension.extension:referenceRange.value[x].low.comparator | |
| Definition | Not allowed to be used in this context |
| Short | < | <= | >= | > - how to understand the value |
| Control | 0..0 |
| Binding | The codes SHALL be taken from QuantityComparator (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1)How the Quantity should be understood and represented. |
| Type | code |
| Is Modifier | true because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. |
| Meaning if Missing | If there is no comparator, then there is no modification of the value |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 132. Extension.extension:referenceRange.value[x].low.unit | |
| Definition | A human-readable form of the unit. |
| Short | Unit representation |
| Control | 1..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 134. Extension.extension:referenceRange.value[x].low.system | |
| Definition | The identification of the system that provides the coded form of the unit. |
| Short | System that defines coded unit form |
| Control | 1..1 This element is affected by the following invariants: qty-3 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need to know the system that defines the coded form of the unit. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 136. Extension.extension:referenceRange.value[x].low.code | |
| Definition | A computer processable form of the unit in some unit representation system. |
| Short | Coded form of the unit |
| Comments | The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. |
| Control | 1..1 |
| Type | code |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 138. Extension.extension:referenceRange.value[x].high | |
| Definition | The high limit. The boundary is inclusive. |
| Short | High limit |
| Comments | If the high element is missing, the high boundary is not known. |
| Control | 0..1 |
| Type | Quantity(SimpleQuantity) |
| Is Modifier | false |
| Summary | true |
| Pattern Value | { |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 140. Extension.extension:referenceRange.value[x].high.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 142. Extension.extension:referenceRange.value[x].high.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.value[x].high.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 144. Extension.extension:referenceRange.value[x].high.value | |
| Definition | The value of the measured amount. The value includes an implicit precision in the presentation of the value. |
| Short | Numerical value (with implicit precision) |
| Comments | The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). |
| Control | 1..1 |
| Type | decimal |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Precision is handled implicitly in almost all cases of measurement. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 146. Extension.extension:referenceRange.value[x].high.comparator | |
| Definition | Not allowed to be used in this context |
| Short | < | <= | >= | > - how to understand the value |
| Control | 0..0 |
| Binding | The codes SHALL be taken from QuantityComparator (required to http://hl7.org/fhir/ValueSet/quantity-comparator|4.0.1)How the Quantity should be understood and represented. |
| Type | code |
| Is Modifier | true because This is labeled as "Is Modifier" because the comparator modifies the interpretation of the value significantly. If there is no comparator, then there is no modification of the value |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. |
| Meaning if Missing | If there is no comparator, then there is no modification of the value |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 148. Extension.extension:referenceRange.value[x].high.unit | |
| Definition | A human-readable form of the unit. |
| Short | Unit representation |
| Control | 1..1 |
| Type | string |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 150. Extension.extension:referenceRange.value[x].high.system | |
| Definition | The identification of the system that provides the coded form of the unit. |
| Short | System that defines coded unit form |
| Control | 1..1 This element is affected by the following invariants: qty-3 |
| Type | uri |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need to know the system that defines the coded form of the unit. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 152. Extension.extension:referenceRange.value[x].high.code | |
| Definition | A computer processable form of the unit in some unit representation system. |
| Short | Coded form of the unit |
| Comments | The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. |
| Control | 1..1 |
| Type | code |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | true |
| Requirements | Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 154. Extension.extension:zlog | |
| Slice Name | zlog |
| Definition | An Extension |
| Short | Extension |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 156. Extension.extension:zlog.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 158. Extension.extension:zlog.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 160. Extension.extension:zlog.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | zlog |
| 162. Extension.extension:zlog.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Type | decimal |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 164. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | https://fhir.kbv.de/StructureDefinition/KBV_EX_MIO_LAB_Alternative_Result |
| 166. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..0 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |